SPECS:

• Weight: 204 lb.
  
• Payload: 1000 lb.
  
• Drawer Payload: 400 lb.

DRAWER DIMENSIONS:

• Drawer Length: 57 in.
  
• Drawer Width: 36 in.
  
• Drawer Clearance: 8 in.
  
• Drawer Extension: 50 in.

Important Notes: 

FITMENT: Despite similar dimensions, all Drawer Systems are laser cut to fit an exact make, model and year. We cannot guarantee the fitment of Drawer Systems not made specifically for that vehicle.

Note: This vehicle requires drilling holes in the truck bed for installation. 

TAILGATE GAP: There will be about 4" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED drawers require 4" to be opened, but the first 5.5" of the drawer are taken up by the handle cavity and drawer taper. So, it is nearly impossible to remove anything from the drawers with the tailgate closed.

COMPATIBLE WITH:

• Spray-In Bed Liners

NOT COMPATIBLE WITH:

• 5th Wheel/Gooseneck
  
• Bedrug / Drop-in Plastic Bed Liner
  
• Stepside / Flareside
  
• DECKED Tool Box
  
• Service Body
  

Features: 

MASSIVE STORAGE - Full bed-length drawers and side access pass-throughs to the wheel wells offer massive, customizable storage. Almost zero wasted space. Exactly 100% increase in the utility of your truck bed. Midsize standard drawers extend 7" further and Midsize short drawers extend 3" further.

100% WEATHERPROOF - From Acts of God to carwashes to anything falling from the sky, your tools and gear stay safe and dry.

WORK-READY PAYLOAD - High impact resistant polymer resin co-molded to a steel subframe gives you a true 1000lb payload letting you load 'er up and get 'er done.

SECURE AND LOCKABLE - Out of sight and out of mind. With your tailgate locked, drawers are inaccessible. Add an optional keyed lockset for complete peace of mind.

BUILT TO ROAM - Keeps dust and other airborne particulate matter out of your drawers using a protective series of closeout panels so your stuff stays clean and cozy.

NEW VS LEGACY DRAWERS COMPARISON

	NEW MIDSIZE DRAWER SYSTEMS	LEGACY MIDSIZE DRAWER SYSTEMS
	Standard | Short	Standard | Short
Drawer Extension	+8" | +3"	42" | 35"
Drawer Volume	+30% | +30%	220L | 178L
Impact Resistance	Extra Strong	Strong
Weatherproof	Weatherproof+: Improved weather stripping and side closeout panels	Yes
Included Accessories	1x D-co Bin, 1x Sixer 16, 1x Halfrack 32, 4x Stash Bins	1x Drawerganizer, 1x D-Box, 2x Drawer Dividers, 1x Crossbox
Tie Downs	Improved integrated, lie-flat Tie-Downs included	Raised Core Trax sold separately
Cases	D-co Case Compatible	Legacy Accessory Compatible
Side Drawer Storage	Larger, modular Stash Bins (formerly "Ammo Cans")	Ammo Cans

FAQs

Is the Drawer System easy to install or remove?

• It’s not rocket science, but it takes about 2-3 hours. It helps to grab a buddy and a beer, or a few. We provide handy instructions and installation videos if you’re the type to follow directions. Once installed, it takes 15 minutes to remove.

How weatherproof/dustproof is a Drawer System?

• Rain, hail, sleet, snow, frogs, very small asteroids; if it falls from the sky it can’t get into your Drawers. Period. The drawers also keep dust and other airborne particulate matter out using a protective series of closeout panels, keeping your stuff cozy and safe.

What is the DECKED Drawer System made of?

• High Density Polyethylene
  
• Stainless Steel Hardware
  
• Cast Aluminum Handles
  
• Galvanized Steel Frame

Will there be a gap between my Drawer System and tailgate?

• Depending on vehicle make and model, there may be a gap between the rear edge of the Drawer System and the tailgate of your truck. DECKED Drawers require 4" to be opened and the first 5.5" of the drawer are taken up by the handle cavity and drawer taper, so it is nearly impossible to remove anything from the drawers with the tailgate closed.

HELPFUL VIDEOS: